Formulated for metallography research, these hot mounting resins have been developed and tested for use on a variety of materials and applications. They are available as Epoxy resins, Acrylic resins, Copper resins and Graphite resins. Phenol-free and Formaldehyde-free hot mounting resins are also available.
- Phenofree Hot Mounting ResinsPhenol-free and formaldehyde-free thermosetting mounting resins.Average lead time: 32 days
POA
Average lead time: 32 days - Epoxy Hot Mounting Resin 633Hot Mounting Resin 633 is suitable for edge examinations on hard to extra hard materials.Average lead time: 32 days
POA
Average lead time: 32 days - Epoxy Hot Mounting Resin 634Hot Mounting Resin 634 is suitable for edge examinations on complex samples.Average lead time: 32 days
POA
Average lead time: 32 days - Acrylic Hot Mounting Resin 616Hot Mounting Resin 616 is a transparent, acrylic hot mounting resin and is suitable for use on most materials.Average lead time: 32 days
POA
Average lead time: 32 days - Acrylic Hot Mounting Resin 616.2Acrylic hot mounting resins 616-2 is suitable for working with alcohol based polishing products or cleaning with ethanol, isopropyl, alcohol or similar.Average lead time: 32 days
POA
Average lead time: 32 days - Copper Hot Mounting Resin 604.3Copper Hot Mounting Resins 604.3 is suitable for for examinations with an SEM or an electrolytic etching device.Average lead time: 32 days
POA
Average lead time: 32 days - Graphite Hot Mounting Resin 617Graphite, conductive, phenolic resin for SEM and TEM applications.Average lead time: 32 days
POA
Average lead time: 32 days - Voluma SpheresCeramic balls used as a base for either hot or cold mounting resins.Average lead time: 32 days
POA
Average lead time: 32 days - Holding Clips Type 5 AGG6463Metal clips to use with hot mounting resins. Packs of 100.Average lead time: 32 days
POA
Average lead time: 32 days