Adhesives

Two part, electrically conductive silver epoxy suitable for mounting SEM samples.

Conductive carbon adhesive tabs with a thin film of strong adhesive, approximately 12.5mm diameter.

A preparation of fine, pure colloidal graphite in water. 500g. 

High Performance Ceramic Adhesive has been especially developed for bonding and sealing ceramics, metals, quartz and glass for high vacuum, high temperature and cryo applications.

A highly conductive silver paint with an acrylic binder.

Finely distributed silver in a less volatile carrier fluid, therefore the suspension dries out slower than most silver paints.

Loctite® 460 is a fast curing, low odour, low viscosity glue which can be used as an alternative to wax for mounting samples on glass for TEM/FIB thinning. 50g. 

DAG 580 is a graphite lubricant which forms a thin, dry film.

Conductive graphite paint with isopropanol base.

Leit C is a suspension of very fine conducting carbon particles in a volatile carrier, suitable for forming conducting bonds between specimens and stubs.

Dry film graphite spray lubricant containing finely divided graphite. 200ml. 

Fibre tip pen dispensing an all purpose glue, useful for mounting particulate samples on SEM stubs.

This electrically conductive adhesive sheet is suitable for cutting to SEM sample sizes.

The genuine replacement for DAG 915, used widely in electron microscopy and electronic circuitry for capacitor terminations, electrostatic screening, coating of UHF reflectors and electroplating on non-conductors.

Electrically conductive adhesive sheets suitable for SEM/EDS applications.

A suspension of finely divided gold particles, useful for analytical work where silver is not suitable.

Fast drying, ultrathin clear adhesive suitable for mounting small particles which can be submerged in other adhesives.

A temperature sensitive adhesive which may be applied to a heated stub to yield a sticky surface for holding specimens. 15g. 

Silver pen suitable for affixing samples to SEM stubs, making instant conductive traces.

Thermoplastic wax ideal for fixing ceramics, glasses and semiconductor materials to specimen mounts for grinding, dimpling or ion beam thinning.

Fast drying, alcohol based silver paint.

Cellulose acetate sheets and tape provide a quick and convenient means of replicating surfaces, particularly from large objects which cannot be sectioned.

Highly conductive, copper based spray suitable for shielding against electromagnetic interference, as well as to protect against electrostatic discharge.

PELCO® paste containing silver flakes (20 µm) in an inorganic silicate aqueous solution has good thermal and electrical conductivity.