|AG85015 1" Work Table
Supplied as standard with the PELCO® Precision Wire Saw, this fixture rotates freely and handles samples that are wax-mounted to aluminium or graphite mounting blocks. This solution is widely used for cutting Transmission Electron Microscopy Samples for wedge-polishing.
|AG85012 2" Work Table
The 2" Work Table accommodates a larger 2" mounting block for working with larger samples or mounting multiple samples at the same time.
|AG85016 Single Axis Goniometer Work Table
This 2" Work Table incorporates a Precision Goniometer with a Vernier scale, giving rotation accurate to 0.2 degrees for angled cuts
|AG85014 Vice Work Table
The Vice can be rotated 360 degrees under the cutting arm and has brass jaws accommodating specimens up to 1.3" in diameter.
|AG85013 Work Table Mount
The Work Table Mount is used with the 1", 2", and Vice Worktables. It mounts to the indexing cross-slide, allowing the Work Tables to rotate 360 degrees under the blade.
|AG85030 3-Axis Goniometer
This goniometer allows tilting in two axis up to +/- 60 degrees, and 360-degree rotation around the base. Each axis has a precision vernier scale accurate to 0.2 deg. It mounts to the indexing stage allowing for highly precise control of the cut. Ideal for working with single crystal specimens.
|AG85024 Tilting Table Mount
Useful for very tall samples and for precise angle control and achieving flat cuts with the AG85030 3-Axis Goniometer, this mount allows the cross-slide to be tilted upwards to remain parallel to the wire blade. This is helpful with tall or awkwardly shaped samples and is required to account for the height of the 3-Axis Goniometer.
|AG85011 Mount for 3-Axis Goniometer
Used to mount the 3-axis Goniometer on the Indexing Cross-feed. Required to fit the Goniometer to the Wire Saw.
|AG85022 Indexing Cross-feed
The indexing cross-feed uses a micrometre with two inches of cross-travel to allow precise alignment of cuts, as well as to take multiple cuts at measured intervals. This is useful, for instance, for Transmission Electron Microscopy specimens. Metric and Imperial versions are available.
|AG85040 Microscope and Mount
Alignment microscope is mounted on a moveable arm allowing the sample to be aligned for high-precision cuts.
AG75054 0.87 x 2.87" Graphite Sample Mount
|AG812-850-010D Single Diamond Wire Blade, 0.010"|
|AG812-850-015D Single Diamond Wire Blade, 0.015"|
|AG812-850-010SS Single Stainless Steel Wire Blade, 0.010"|
|AG812-850-015SS Single Stainless Steel Wire Blade, 0.015"|
|AG85051 2 x 2" Al Sample Mount|
|AG75053 1 x 3" Al Sample Mount|