A range of adhesives, conductive paints and materials useful for EM specimen preparation.
- Silver Epoxy Kit 5g AGG3349-5Two part, electrically conductive silver epoxy suitable for mounting SEM samples.In Stock£67.74In Stock
- Conductive Carbon Discs - Roll of 250 AGG3111Conductive carbon adhesive tabs with a thin film of strong adhesive, approximately 12.5mm diameter.In Stock£79.43In Stock
- Aquadag Colloidal Graphite ECO AGG303EA preparation of fine, pure colloidal graphite in water. 500g.In Stock£32.36In Stock
- PELCO High Performance Ceramic AdhesiveHigh Performance Ceramic Adhesive has been especially developed for bonding and sealing ceramics, metals, quartz and glass for high vacuum, high temperature and cryo applications.Average lead time: 9 to 13 days
From £46.92
Average lead time: 9 to 13 days - PELCO Conductive Silver Paint, 15g AG16062-15A highly conductive silver paint with an acrylic binder.In Stock£76.90In Stock
- Slow-Drying Silver PaintFinely distributed silver in a less volatile carrier fluid, therefore the suspension dries out slower than most silver paints. Special prices valid while stocks last.Average lead time: 1 to 13 days
From £14.49
Average lead time: 1 to 13 days - Loctite 460 Sample Bonding Adhesive AGG3204-50Loctite® 460 is a fast curing, low odour, low viscosity glue which can be used as an alternative to wax for mounting samples on glass for TEM/FIB thinning. 50g.Average lead time: 13 days£150.45Average lead time: 13 days
- DAG 580 Dry Film Lubricant AGG3656ADAG 580 is a graphite lubricant which forms a thin, dry film.Average lead time: 13 days£103.41Average lead time: 13 days
- Conductive Graphite PaintConductive graphite paint with isopropanol base.Average lead time: 1 to 29 days
From £12.03
Average lead time: 1 to 29 days - Conducting Carbon Cement (Leit-C)Leit C is a suspension of very fine conducting carbon particles in a volatile carrier, suitable for forming conducting bonds between specimens and stubs.Average lead time: 1 day
From £13.77
Average lead time: 1 day - Graphit '33' Spray AGG3689Dry film graphite spray lubricant containing finely divided graphite. 200ml.In Stock£25.23In Stock
- Glue pen for mounting SEM samples. 10g AGG3112Fibre tip pen dispensing an all purpose glue, useful for mounting particulate samples on SEM stubs.In Stock£9.40In Stock
- Silver Adhesive Sheet, Double Coated AGG3792This electrically conductive adhesive sheet is suitable for cutting to SEM sample sizes.Average lead time: 6 days£789.58Average lead time: 6 days
- Acheson Silver DAG 1415MThe genuine replacement for DAG 915, used widely in electron microscopy and electronic circuitry for capacitor terminations, electrostatic screening, coating of UHF reflectors and electroplating on non-conductors.Average lead time: 1 to 27 daysFrom £16.44Average lead time: 1 to 27 days
- Carbon adhesive sheet double coated, pack of 10 AGG3794Electrically conductive adhesive sheets suitable for SEM/EDS applications.Average lead time: 20 days£157.91Average lead time: 20 days
- Conductive Gold DAGA suspension of finely divided gold particles, useful for analytical work where silver is not suitable.Average lead time: 9 to 13 days
From £12.16
Average lead time: 9 to 13 days - Mikrostik Non-Conductive Adhesive, 14ml AGG3793Fast drying, ultrathin clear adhesive suitable for mounting small particles which can be submerged in other adhesives. Special prices valid while stocks last.In StockSpecial Price £10.21 was £15.45 You save: £6.29 (34%)In Stock
- Tempfix AGG3305A temperature sensitive adhesive which may be applied to a heated stub to yield a sticky surface for holding specimens. 15g.Average lead time: 13 days£50.57Average lead time: 13 days
- Conductive Silver PenSilver pen suitable for affixing samples to SEM stubs, making instant conductive traces.Average lead time: 1 day
From £49.28
Average lead time: 1 day - Specimen Mounting WaxThermoplastic wax ideal for fixing ceramics, glasses and semiconductor materials to specimen mounts for grinding, dimpling or ion beam thinning.Average lead time: 1 to 34 days
From £51.00
Average lead time: 1 to 34 days - Conductive Silver PaintFast drying, alcohol based silver paint.Average lead time: 9 to 13 days
From £12.16
Average lead time: 9 to 13 days - Replication MaterialsCellulose acetate sheets and tape provide a quick and convenient means of replicating surfaces, particularly from large objects which cannot be sectioned.Average lead time: 1 to 27 days
From £18.23
Average lead time: 1 to 27 days - Copper Spray AGG3721Highly conductive, copper based spray suitable for shielding against electromagnetic interference, as well as to protect against electrostatic discharge. Special prices valid while stocks last.In StockSpecial Price £24.22 was £43.17 You save: £22.74 (44%)In Stock
- PELCO High Performance Silver Paste AGG3304PELCO® paste containing silver flakes (20 µm) in an inorganic silicate aqueous solution has good thermal and electrical conductivity.Average lead time: 13 days£537.61Average lead time: 13 days