Agar Scientific

Microscopy and Lab
supplies at your fingertips

Presslam 1.1 - Advanced Automatic Mounting Press

The Presslam 1.1 advanced automatic programmable Mounting Press is a innovative design producing a total cycle time as low as 5 minutes.

All prices exclude VAT.

The Presslam 1.1 Advanced Automatic Mounting Press is a distinctly upgraded and innovative design which exhibits several new and improved features. Equipped with an exclusive heating and cooling system, it has a total cycle time of 5 minutes if the preheating element is in operation. The preheating element keeps the unit at the start temperature for 20 minutes eliminating the need to heat from room temperature to curing temperature each cycle. An audible alert notifies users when cycle is complete.

The Presslam 1.1 Advanced Automatic Mounting Press features a single Touch Screen Keypad (EZ-TSK) for simple user operation. Users can set the temperature, pressure, heating, and cooling parameters from a central screen. The unit has 4 pressure modes allowing users to modify based on the mounting compound or variety of parts being mounted. The unit arrives with preset programs for common compression mounting compounds and is equipped with a USB port for simple saving and loading of customised programs.

A water saving function allows users to conserve water consumption.

Mould assemblies are easily interchanged; it is not necessary to disconnect the air or electrical supply. The unit is capable of double mounting by utilising a spacer. The upper portion of the Presslam 1.1 Advanced Automatic Mounting Press conveniently unscrews for easy cleaning.

A water inlet and outlet are located on the rear panel. The unit and operators are protected by a safety solenoid valve. Located on opposite sides of the unit are panels allowing for convenient access; one for pneumatics and a second for electrical

Key Features:

  • Exclusive heating and cooling system with a preheating element reducing total cycle time to 5 minutes
  • Audible alert when cycle is complete
  • EZ-TSK Touch screen Keypad with centralised programming of temperature, pressure, heating, and cooling parameters
  • Water conserving program (up to 25%)
  • USB port to save & load programs
  • Removable top portion for easy cleaning
  • Safety solenoid valve
  • Separate pneumatic and electrical systems for easy maintenance

Book a Demo!
We can arrange personal demonstrations of this equipment in our dedicated demonstration lab at Stansted, or at you own premises.  Click here to find out more >>

Capacity 25.4 to 50mm Ø
Heating system  4 x 600W around mould
Temperature range  20 to 200°C
Heating cycle 0 to 30 min
Cooling cycle 0 to 30 min
Pressure 0 to 1,600 daN
Double mounting Yes - all diameter
Program backup  300 with USB connection
Pressurization modes  4 different modes
Chamber closing  half turned canopy with a safety chamber
Mould changing  Quick, without connectors – electric or hydraulic
Preheating mode  Yes (cleared after 6 min without manipulation)
Water saving  Yes (up to 25%)
Voltage  230V – 50 Hz single-phase
Pneumatic feed  6 to 10 bar
Dimensions  L x D x H 250 x 470 x 680 mm
Weight 72kg (depending on mould size)

Description Code Stock Unit Price Qty
Automatic Mounting Press PRESSLAM 1.1 25.4 to 50mm dia AGB6312 Lead time:
10 days
Cooling Unit for PRESSLAM 1.1 AGB6312-C Lead time:
10 days

Presslam 1.1 - Advanced Automatic Mounting Press

  • Presslam 1.1 - Advanced Automatic Mounting Press
  • Presslam 1.1
  • Presslam 1.1
  • Presslam 1.1