Menu
ORDER ONLINE - no minimum order value
AGENTS & DISTRIBUTORS - available worldwide
REQUEST QUOTES - fast online pricing
Filters
Page

76 products available

You've viewed 24 of 76 products

  1. R2 Rotator with 1051 Head AG1050
    Low-speed mixer for EM specimen infiltration preparations (0.5 - 7.5 RPM), design provides two angles 55° or 35°. Special prices valid while stocks last. 
    In Stock
    Special Price £666.00 was £1,095.51 You save: £515.41 (39%)
    In Stock
    Down
    Up
  2. Formvar carbon films on Nickel
    Thin cast films of Formvar have been strengthened with the addition of a layer of evaporated carbon on nickel grids. Special prices valid while stocks last. 
    Average lead time: 1 to 27 days

    From £79.67

    Average lead time: 1 to 27 days
  3. Boron carbide standard AGS144
    Small boron carbide particles. Special prices valid while stocks last. 
    In Stock
    Special Price £3.00 was £20.34 You save: £20.81 (85%)
    In Stock
    Down
    Up
  4. Ultra-smooth carbon foils
    Ultra-smooth carbon foils, manufactured by ACF Metals, have been prepared in ultra-clean conditions to yield films that are effectively structureless when viewed at high magnifications in the EM. Special prices valid while stocks last. 
    Average lead time: 1 to 74 days

    From £323.30

    Average lead time: 1 to 74 days
  5. Identigrids
    These unique grids are manufactured only by Agar Scientific to provide positive identification of a specimen throughout its handling. Special prices valid while stocks last. 
    Average lead time: 1 to 29 days

    From £5.00

    Average lead time: 1 to 29 days
  6. Indexed Micropore Silicon Nitride Membrane, Hexagonal Arrangement
    500μm x 500μm aperture in 200nm low-stress silicon nitride membrane. 6 micropore sizes. Hexagonal arrangement. Pack of 10.  Special prices valid while stocks last. 
    Average lead time: 1 to 29 days

    POA

    Average lead time: 1 to 29 days
  7. Crystal Substrates
    High purity optical grade single crystals of sodium chloride, potassium bromide and potassium chloride are excellent substrates for growing epitaxial films. Special prices valid while stocks last. 
    Average lead time: 1 to 13 days

    From £58.45

    Average lead time: 1 to 13 days
  8. Specimen Circlip Injector Circlips
    Spare Tungsten wire, split spring circlips. Special prices valid while stocks last. 
    Average lead time: 1 day

    From £25.03

    Average lead time: 1 day
  9. Indium Wire AGE432
    Indium wire for high vacuum seals in clean systems. Special prices valid while stocks last. 
    In Stock
    Special Price £78.00 was £151.17 You save: £87.80 (48%)
    In Stock
    Down
    Up
  10. Apertures, 3.00 x 0.25mm, Molybdenum
    3.00mm dia, 0.25mm thick. Molybdenum. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems. Special prices valid while stocks last. 
    Average lead time: 1 to 69 days

    From £55.88

    Average lead time: 1 to 69 days
  11. Thin Foil Apertures
    Thin foil apertures are frequently used in the objective lenses of high resolution and electron beam lithography instruments. Special prices valid while stocks last. 
    Average lead time: 1 to 27 days

    From £91.83

    Average lead time: 1 to 27 days
  12. Apertures, 2.0 x 0.6mm, Molybdenum
    2mm dia, 0.6mm thick. Molybdenum. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems. Special prices valid while stocks last.  
    Average lead time: 1 to 69 days

    From £56.73

    Average lead time: 1 to 69 days
  13. Silicon Carbide Pre-Grinding Paper Discs
    Waterproof silicon carbide papers are often preferred for pre-grinding operations because of their rapid cutting properties and close grain size. Special prices valid while stocks last. 
    Average lead time: 1 to 6 days

    From £10.00

    Average lead time: 1 to 6 days
  14. Quantifoil R2/4 holey carbon films - Circular
    Circular, hole size 2µm dia, separation 4µm
    Average lead time: 1 to 199 days

    POA

    Average lead time: 1 to 199 days
  15. Bio Diamant Paste Series 100
    Diamond powder pastes designed for grinding and polishing work. 
    Average lead time: 34 days

    From £74.76

    Average lead time: 34 days
  16. Grid Staining System
    Grid staining system for 25 grids, consisting of numbered grid holder and handle, cover and staining vessels (two supplied). Special prices valid while stocks last. 
    Average lead time: 1 day

    From £87.02

    Average lead time: 1 day
  17. Bio Diamant Abrasive Suspension NEODIA P
    High performance polycrystalline diamond abrasive suspension.
    Average lead time: 34 days

    From £37.23

    Average lead time: 34 days
  18. Apertures, 4.0 x 0.6mm, Platinum/Iridium
    4mm dia, 0.6mm thick. Platinum/Iridium. High-quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.
    Average lead time: 44 to 89 days

    From £102.36

    Average lead time: 44 to 89 days
  19. Crystalbond Adhesives
    Crystalbond adhesives allow temporary bonding of delicate crystals, metallurgical samples, glass components and ceramic substrates.
    Average lead time: 1 to 29 days

    From £32.80

    Average lead time: 1 to 29 days
  20. Ammonium Molybdate
    Negative stain. 25g or 100g.
    Average lead time: 20 days

    From £92.49

    Average lead time: 20 days
  21. Apertures, 1.85 x 0.1mm, Platinum/Iridium
    1.85mm dia, 0.1mm thick. Platinum/iridium. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.
    Average lead time: 69 days

    From £111.99

    Average lead time: 69 days
  22. CAMEO Disc Silver, Rhodium & Gold Grinding and Pre-polishing Discs
    Silver, gold and rhodium grinding and pre-polishing discs, designed to be used with the Bio Diamant abrasive suspensions.
    Average lead time: 34 days

    From £107.55

    Average lead time: 34 days
  23. Athene Type 12, 300 Mesh Thick Bar/Thin Bar TEM Grids
    Thick bar/thin bar grids. 300 mesh, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.
    Average lead time: 27 days

    From £14.72

    Average lead time: 27 days
  24. 1500um Hole TEM Support Grids
    Single 1500μm hole TEM support grids. 3.05mm diameter. Available in Copper, Copper/Palladium, Nickel, Gold, Aluminium, Molybdenum, Stainless Steel or Titanium.
    Average lead time: 1 to 20 days

    From £28.30

    Average lead time: 1 to 20 days
Filters
Page

76 products available

You've viewed 24 of 76 products

PRICE & AVAILABILITY: Please note that while we are working closely with our suppliers to minimise any global supply chain issues, prices and availability may be subject to change at short notice.
FILTERS
Hole Arrangement
Hole Diameter
Manufacturer
Mesh Size
Slot Size
Range
Diameter
Material
Mesh Shape
Size
Style
VIEW PRODUCTS Cancel