Agar Scientific specialises in producing a wide range of specimens specifically for SEM test and calibration where quantification or high resolution results are required.
SEM resolution is tested in terms of a combination of criteria, namely resolved gaps and the number of grey levels in the image. This is to ensure that the resolution has not been distorted by using the contrast to maximise visibility of edges. High resolution images ideally should show fine detail together with a lack of noise, evidenced by a good range of grey levels.
For assessments of resolution in scanning electron microscopes, we have developed a range of gold on carbon and tin on carbon test specimens. These specimens are suitable for tests of SE and BSE imaging and also for chemical mapping in high resolution systems such as in Auger scanning instruments. The specimens can be supplied on most types of specimen stub.
- Critical Dimension StandardsEconomically priced, fully-featured Critical Dimension Standards for calibration over a wide measurement range.Average lead time: 1 to 29 daysFrom £0.00Average lead time: 1 to 29 days
- Bi-Directional Critical Dimension StandardsEconomically priced yet fully-featured Bi-Directional Critical Dimension Standard with X and Y axis for calibration over a wide measurement range.Average lead time: 1 dayFrom £0.00Average lead time: 1 day
- Boron substrates for SEM/EDX micro analysisDiamond polished, crystalline boron surfaces for semi-quantitative SEM/EDX analysis of carbonaceous samples, e.g. soot.Average lead time: 29 days
From £404.36
Average lead time: 29 days - 1000 mesh calibration grid AGS1965A single 1000 mesh 3mm diameter TEM grid for calibration. Supplied in a vial.In Stock£16.51In Stock
- Fine meshThis is available in copper, nickel or gold, in 1000, 1500 and 2000 mesh (1000, 1500 or 2000 repeat distance per inch), ie. 25, 18.75 and 12.5µm.Average lead time: 1 to 13 days
From £21.43
Average lead time: 1 to 13 days - Polystyrene Latex ParticlesThis range of polystyrene particles is excellent for SEM calibration purposes.Average lead time: 1 day
From £21.43
Average lead time: 1 day - Glass Size StandardsGlass microspheres can be used in any application that requires a NIST traceable size standard with a narrow size distribution, and where sample conditions may not be suitable for polystyrene spheres.Average lead time: 1 to 199 days
POA
Average lead time: 1 to 199 days - Gold on Carbon AGS1969 - High Resolution Test SpecimenHigh resolution test specimen with a particle size range from approximately 3 - 50nm. Special prices valid while stocks last.Average lead time: 1 to 44 days
From £89.36
Average lead time: 1 to 44 days - Geller Reference Standard MRS-3The MRS-3 is a universal magnification calibration standard suitable for a wide range of instrumentation. Magnifications from 10X to 50,000X. 2µm minimum pitch. Traceable to national labs for ISO9000 and ISO17025.Average lead time: 29 days
POA
Average lead time: 29 days - Polystyrene latex spheresThis range of polystyrene latex spheres can be used for either SEM or TEM applications.Average lead time: 9 to 29 days
From £23.86
Average lead time: 9 to 29 days - Silicon Test SpecimenA silicon test specimen made of single crystal silicon of overall dimensions 5 x 5mm and is 0.5mm thick. Special prices valid while stocks last.Average lead time: 1 to 27 days
From £41.67
Average lead time: 1 to 27 days - Gold on Carbon AGS1987 - Ultra High Resolution Test SpecimenUltra high resolution test specimen with a particle size range from approximately <2 - 30nm. Special prices valid while stocks last.Average lead time: 1 to 44 days
From £139.01
Average lead time: 1 to 44 days - Geller Reference Standard MRS-4A fifth Generation, high magnification reference standard for instrument calibration from 10X to 200,000X (1/2µm minimum pitch). NIST and NPL traceable for ISO9000 and ISO17025.Average lead time: 29 days
POA
Average lead time: 29 days - Chessy Test Specimen AGS171The Chessy test specimen comprises more than 1.6 million gold squares on silicon which form a four-fold chequerboard pattern in a total size of 1cm2.In Stock£1,392.70In Stock
- Geller Reference Standard MRS-6A fifth generation Magnification Reference Standard & Stage Micrometer for instrument calibration from 1,500X to 1,000,000X (80nm minimum pitch). NIST and NPL traceable for ISO9000 and ISO17025.Average lead time: 29 daysAverage lead time: 29 days
- Tin on Carbon AGS1967 - Resolution Test SpecimenResolution test specimen with a particle size range from approximately 10 - 100nm. Special prices valid while stocks last.Average lead time: 1 to 44 days
From £75.25
Average lead time: 1 to 44 days - Medium resolution aluminium-tungsten dendrites AGS145The various spacings created by the dendritic structure of this specimen are suitable for performing point resolution tests and the topographical arrangement of the dendrites for a grey level test.In Stock£215.26In Stock
- Geller reference standard re-callibration serviceGeller MicroAnalytical magnification standards can be cleaned and re-certified to assure continued use as a traceable standard.Average lead time: 20 days
POA
Average lead time: 20 days - Gold on Carbon AGS168Z - Low Voltage Resolution Test SpecimenLow voltage resolution test specimen with a particle size range from approximately <30 - 300nm. Special prices valid while stocks last.Average lead time: 1 to 44 days
From £76.96
Average lead time: 1 to 44 days - Monosized microsphere size standards 1 - 1000umThese highly uniform polystyrene spheres are calibrated by NIST standardised methods which include photon correlation spectroscopy, transmission electron microscopy and light microscopy.Average lead time: 6 to 44 days
From £272.44
Average lead time: 6 to 44 days - Uniform polymer microspheres 5 - 40umThis series of microspheres has a slightly wider distribution than the monodisperse microsphere size standards.Average lead time: 6 days
From £576.28
Average lead time: 6 days - Tin on Carbon AGS1988 - Low Voltage Resolution Test SpecimenLow voltage resolution test specimen with a particle size range from approximatelyAverage lead time: 1 to 27 days
From £141.54
Average lead time: 1 to 27 days - Silica Particle Size Standards 0.5 - 1.5umThis series of Silica particle size standards is designed for applications requiring monodisperse inorganic spheres.Average lead time: 13 to 20 days
From £396.60
Average lead time: 13 to 20 days - Tin on Carbon AGS1937 - Universal Resolution SpecimenUniversal resolution test specimen with a particle size range from approximately <5nm - 30um. Special prices valid while stocks last.Average lead time: 1 to 44 days
From £105.46
Average lead time: 1 to 44 days