Menu
ORDER ONLINE - no minimum order value
AGENTS & DISTRIBUTORS - available worldwide
REQUEST QUOTES - fast online pricing

Boron substrates for SEM/EDX micro analysis

Diamond polished, crystalline boron surfaces for semi-quantitative SEM/EDX analysis of carbonaceous samples, e.g. soot.

All prices exclude VAT.
Name & Code
Grouped product items
Code & DescriptionAvailabilityPriceQty
AGS310
Boron surface for SEM/EDX, ca. 1mm² on 1cm² triangle, no adhesive (Standard)
Loading...  Loading...
Loading...  Loading...
£460.95
£460.95
AGS311
Boron surface for SEM/EDX, ca. 1mm² on 1cm² triangle, with adhesive (Standard)
Loading...  Loading...
Loading...  Loading...
£404.36
£404.36
AGS320
Boron surface for SEM/EDX, ca. 2mm² on 1cm² triangle, no adhesive (Premium)
Loading...  Loading...
Loading...  Loading...
£508.20
£508.20
AGS321
Boron surface for SEM/EDX, ca. 2mm² on 1cm² triangle, with adhesive (Premium)
Loading...  Loading...
Loading...  Loading...
£508.20
£508.20
Product Description

A considerable number of natural and artificial materials are made of light elements such as carbon (e.g. soot), nitrogen (e.g. nitrates) and oxygen (e.g. minerals). Advances in EDX technology enable measurement and semi-quantitative determination of light elements in micro and nano-materials using SEM. Traditionally carbon tabs and polycarbonate filters are used as substrates or sampling surfaces for subsequent SEM/EDX analysis. The disadvantage of these carbon bearing substrates is the carbon concentration cannot be determined for particles smaller than 2μm in diameter or for materials built of thin structures. The evaluated carbon is not only from the analysed substance but also from the substrate itself.

This development of boron substrates combined with state-of-the-art, high-resolution EDS systems it is now possible to analyse carbon and other light elements semi-quantitatively. This progress applies to both manual and fully automated SEM/EDX analysis.

All substrates carry an individual serial number. To improve the sample application, the substrate but can also be provided with a very thin based acrylic based adhesive layer.

Four types are available:

  • AGS310 - Standard Boron surface approx. 1mm² on a 1cm² triangle substrate,
    without adhesive
  • AGS311 - Standard Boron surface approx. 1mm² on a 1cm² triangle substrate,
    with adhesive
  • AGS320 - Premium Boron, surface approx. 2mm² on a 1cm² triangle substrate,
    without adhesive
  • AGS321 - Premium Boron surface approx.  2mm² on a 1cm² triangle substrate,
    with adhesive
Features & Specifications
Chemical composition 
99.7% boron
Manufacture 
One or several polished boron crystals embedded in an electrically conductive synthetic material. (¼ rondel, r = 15mm, thickness = 1-2mm)
Analysable boron surface 
Minimum 2mm2 Very flat, smooth and homogenous surface
Re-utilisation
Boron substrates can be cleaned and reused several times
Additional information 
Boron crystals can be porous. Hence, some surfaces can contain few holes Boron is an extremely hard and brittle material, therefore, it is possible that few fractures formed on the surface while producing the substrates
Adhesive layer 
Boron substrates can be delivered with (for better adhesion of the sample) or without an adhesive coating.
Delivery & Returns
PRICE & AVAILABILITY: Please note that while we are working closely with our suppliers to minimise any global supply chain issues, prices and availability may be subject to change at short notice.