£ GBP

Agar Scientific

Microscopy and Lab
supplies at your fingertips

Geller reference standard MRS-4

A fifth Generation, high magnification reference standard for instrument calibration from 10X to 200,000X (1/2µm minimum pitch). NIST and NPL traceable for ISO9000 and ISO17025.

All prices exclude VAT.

The Geller MRS-4.2, is a fifth generation magnification calibration standard. These calibration standards are highly accepted pitch standards, they are offered as traceable certified reference materials or, optionally, at lower cost without traceability. To support the standard we offer a cleaning service and recertification program, as required by the ISO-9001, ISO-16700 and QS-9000 international quality standards.

  • Electron Microscopy: SEM (secondary (in-lens & conventional and backscattered electrons), TEM (for use with a bulk holder- the MRS-4.2 can be reduced to 3mm dia by ½ mm thick).
  • Scanning Microscopies and Profilometry: STM, AFM, stylus and optical etc. The pattern height is 70nm.
  • Optical Microscopy: transmitted, reflected, bright/dark field, differential contrast, and confocal.
  • Chemical mapping: EDS, WDS, micro/macro XRF, XPS, Auger & others. The pattern is fabricated using 70nm CrO2/Cr over quartz.
  • Particle Size Counting: series of circles, squares & rectangles for calibration confirmation.

The simple geometric design of the MRS-4.2 has groups of nested squares spanning several orders of magnitude with pitches of ½µm, 1µm, 2µm, 50µm and 500µm. Newly incorporated into the standard is a ruler which is 6mm long with 1µm increments and large 1 and 2µm horizontal and vertical pitch patterns for ISO-16700 compliance.  The pitch (the distance between repeating parallel lines using center-to-center or edge–to-edge spacing) is measured and certified. Linewidth measurements (the measurement of a single line or space width) can only be related if the same type of illumination is used as for the calibrating instrument since edge effects lead to uncertainty in the edge locations. Using pitch measurements errors from edge-to-edge locations cancel as long as like positions are measured.

Description Code Stock Unit Price Qty
MRS4 Geller Reference Standard Non Traceable AGS1810 Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard Non Traceable in SEM Retainer AGS1810-S Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard Non Traceable in TEM 3mm x 0.25mm Retainer AGS1810-T Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard Non Traceable (1" x 3" Glass Slide Mounting) AGS1810-G Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard Non Traceable in Optical Retainer AGS1810-O Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XY Traceable AGS1811 Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XY Traceable in SEM Retainer AGS1811-S Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XY Traceable in TEM 3mm x 0.25mm Retainer AGS1811-T Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XY Traceable (1" x 3" Glass Slide Mounting) AGS1811-G Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XY Traceable in Optical Retainer AGS1811-O Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XYZ Traceable AGS1812 Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XYZ Traceable in SEM Retainer AGS1812-S Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XYZ Traceable in TEM 3mm x 0.25mm Retainer AGS1812-T Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XYZ Traceable (1" x 3" Glass Slide Mounting) AGS1812-G Lead time:
30 days
EA
£0.00
MRS4 Geller Reference Standard XYZ Traceable in Optical Retainer AGS1812-O Lead time:
30 days
EA
£0.00
MRS Pin ONLY for use with SEM Retainer (MRS3 & MRS4 Range) AGS1810P Lead time:
30 days
EA
£0.00
   

MRS-4 EM Reference standard

  • MRS-4 EM Reference standard
  • MRS OMR Retainer
  • MRS Slide retainer
  • MRS SEM Retainer

Alternative Products

  • Geller reference standard re-callibration service

    Geller reference standard re-callibration service

    View >