Support films - Silicon
Agar offers a range of different silicon nitride membranes and other silicon based supports. These are suitable where carbon or plastic films are not appropriate.
-
Silicon nitride membranes - 200um substrate thickness, multi-frame array (7 x 7 array)
More Information200µm substrate thickness, multi-frame array (7 x 7 array) with 20, 30, 50, 75, 100, 150, 200 or 500nm Silicon nitride membranes. -
Silicon nitride membranes - 200um substrate thickness, multi-frame array (5 x 5 array)
More Information200µm substrate thickness, multi-frame array (5 x 5 array) with 20, 30, 50, 75, 100, 150, 200 or 500nm Silicon nitride membranes. -
Silicon nitride membranes - 200um substrate thickness, multi-frame array (4 x 4 array)
More Information200µm substrate thickness, multi-frame array (4 x 4 array) with 30, 50, 75, 100, 150, 200 or 500nm Silicon nitride membranes.
-
Silicon nitride membranes - 100um substrate thickness
More Information100µm substrate thickness with membrane thicknesses from 10nm to 500nm.
-
Silicon nitride membranes - 200um substrate thickness
More Information200µm substrate thickness with membrane thicknesses from 10nm to 500nm.
-
Silicon nitride coated discs (blanks)
More InformationThese 200µm thick 3mm silicon support discs have a low stress, ultra-flat 50nm layer of silicon nitride on both sides. -
Silicon aperture frames
More InformationSilicon aperture frames are 3mm diameter discs of thickness 200µm containing square or rectangular apertures of three sizes. -
Silicon dioxide films
More InformationSilicon dioxide films offer a TEM support membrane of exceptional flatness combined with a thickness of 40nm, 18nm or 8nm. -
Silicon monoxide on removable Formvar
More InformationSilicon monoxide support films are resilient and able to withstand vigorous specimen preparation techniques -
Holey Silicon Nitride Support Films
More Information200nm membrane with holes from 1250nm down to 100nm -
Silicon monoxide on lacey Formvar, 300 Mesh
More InformationSilicon monoxide films are also available with a stabilised lacey Formvar film (this does not have a removable thin Formvar backing).Part no: AGS185-3
-