£ GBP

Agar Scientific

Microscopy and Lab
supplies at your fingertips

Grid & sample holders

TEM grid holders with short posts of standard 3.2mm diameter. The short post TEM grid/sample holder has workstations for two TEM grids and with either one or two sample pucks. The stainless steel holders are very slightly magnetic. Non-magnetic versions of each of these holders are also available.

The pivoting TEM grid holder has workstations for two TEM grids and allows manual adjustment of the grid holder plate to obtain the optimal milling incidence angle, even when at the FIB stage tilt limit. The TEM plate angle is manipulated in situ, using the tip of an empty AutoProbe™ 300 gripper shaft. The pivoting grid holder is non-magnetic.

The single sample holder accommodates a 3mm TEM grid, and has raised edges that have been designed to protect samples from accidental damage. The single sample holder can be mounted on the sample holder base, which allows samples to be viewed under a stereomicroscope from two angles without focus adjustment.

Set Descending Direction

7 Item(s)

  1. Thinning coupons

    Thinning coupons

    More Information

    Omniprobe copper TEM sample grid coupons of 45 and 26.5° are available for frontside and backside thinning.

  2. Atom probe preparation coupons

    Atom probe preparation coupons. Box of 20

    More Information

    These copper coupons have been designed to facilitate the preparation of atom probe samples using the Omniprobe's 45° Short-Cut™ tool.

    Part no: AGJ442

  3. TEM grid/sample holders - short post

    TEM grid/sample holders - short post

    More Information
    TEM grid holders with short posts, 3.2mm dia x 4mm length.
  4. TEM grid/sample holders - long post

    TEM grid/sample holders - long post, single sample holder

    More Information
    TEM grid holders with short posts of standard 3.2mm diameter are available.

    Part no: AGJ404

  5. TEM grid/sample holders - long post

    TEM grid/sample holders - long post, sample holder base

    More Information
    TEM grid holders with short posts of standard 3.2mm diameter are available.

    Part no: AGJ405

  6. TEM grid/sample holders - long post

    TEM grid/sample holders - long post

    More Information
    TEM grid holders with short posts of standard 3.2mm diameter are available.
  7. TEM grid/sample holders - long post

    TEM grid/sample holders - long post

    More Information
    TEM grid holders with short posts of standard 3.2mm diameter are available.
Set Descending Direction

7 Item(s)