FIB
-
5 post lift-out grids, copper. Box of 100
More Information5 post copper lift-out grids are suitable for in situ lift-out.
CopperPart no: AGJ422
-
Standard probe tips
More InformationStandard probe tips are available as all-tungsten or with nickel shanks, and have a taper angle designed to ensure extended life. -
Probe tips and tip holders for AutoProbe instruments
More InformationThese tungsten probe tips for the AutoProbe 300 nanomanipulator have been designed to allow speedy in situ probe tip exchange and are compatible with the Short-Cut tool. -
Probe tip for Xtreme Access instruments
More InformationA tungsten probe tip for the Xtreme Access is available as a standard type for direct conversion to a TEM grid.
-
Loctite 460 sample bonding adhesive, 50g.
More InformationLoctite® 460 is a fast curing, low odour, low viscosity glue which can be used as an alternative to wax for mounting samples on glass for TEM/FIB thinning.Part no: AGG3204-50
-
Biopunch, 9 core diameters: 1.5mm - 8mm
More Information!NEW!
The Biopunch is a coring tool designed to core, punch and retrieve samples from thin or soft substrate source materials such as tissue, gels, paper, cloth, leaves, paint chips and films
-
Diamond Grids
More InformationDiamond grids are made of pure synthetic diamond, and are used with heat sensitive samples. -
M-Bond 610 adhesive
More InformationM-Bond 610 is a non-conductive, two-component, solvent-thinned epoxy-phenolic adhesive for high performance applications. -
FIB SEM mould for biological specimens
More InformationThis silicone rubber mould has been developed in collaboration with Cancer Research UK's London laboratories.Part no: AGG3504
-
Chien staining pad
More InformationFlexible silicone pad designed for staining grids, as well as holding tabbed grids, Omniprobe grids and samples.Part no: AGG3766
-
FIB grid storage box
More InformationA storage box for four FIB lift-out grids or half grids.Part no: AGG3719
-
Lift-out grid storage box
More InformationThe storage box holds up to 100, horizontally stored, standard 3mm lift-out TEM grids.Part no: AGJ430
FIB
Category Navigation:
Refine your search
- Category
-
- Calibration standards (11)
- FIB Sectioning Service (2)
- Grid & sample holders (7)
- Grids for FIB (5)
- Probe tips and holders (3)
- Specimen preparation (6)
- Specimen storage (2)
- Specimen stubs (6)
- Range
- Material
-
- Aluminium (6)
- Beryllium (1)
- Copper (3)
- Diamond (1)
- Molybdenum (2)
- Style
Loading...